manual impact hammer Manufacturers

Forging Process is one of the two components of forging (forging and stamping), in which forging machine is used to press metal billet to produce plastic deformation and Electric Power Fittings so as to obtain forging with certain mechanical properties, shape and size.
According to the way the blank moves, forging can be divided into free forging, upsetting, extrusion, die forging, closed die forging, closed heading forging. 1.Free forging. Use the impact force or pressure to deform the metal between the upper and lower iron (anvil block) to obtain the required forgings, mainly manual forging and mechanical forging two kinds.
2.Die forging. Die forging is divided into open die forging and closed die forging. The metal blank is obtained by compression deformation in the forging die bore of a certain shape, which can be divided into cold heading, roll forging, radial forging and extrusion, etc.
3, closed die forging and closed heading forging because there is no flying edge, the utilization rate of materials is high. It is possible to finish complex forgings with one or several processes. Since there is no flying edge, the forgings have less force area and less load required. However, it should be noted that the blank can not be completely restricted, so it is necessary to strictly control the volume of the blank, control the relative position of the forging die and measure the forging die, and try to reduce the wear of the forging die.

The METALLECA® Medical Device Accessories need high quality requirements for materials, surfaces and dimensions. Chinese proverb: a workman must first sharpen his tools if he is to do his work well. With the rapid development of medical device technology, the demand for medical device precision stamping parts is increasing. At the same time, the technical requirements are getting higher, and the applications are getting wider. Basically, stamping parts appearance has to zero defects. For this reason, a standardized manufacturing process to ensure quality is necessary. We focus on the selection of raw materials, mold requirements (design, material selection, surface cleanliness, dimensional accuracy, service life), the precision accuracy of stamping equipment, production efficiency, protective turnaround, post processing, surface treatment, packaging methods, etc.

Our METALLECA® Pipe Valve Joint production can be customized according to requirement of domestic and foreign customers. Production would follow specific requirements (assembly, performance, life, corrosion resistance, etc.) to select the correct processes and materials (mainly used aluminum alloy, stainless steel, carbon steel). Otherwise, the production and processing are based on the customer specification. We specialize in producing unpatented products and do not have our own brand. At present, we supply a few quantities for supporting machinery and equipment to domestic and foreign customers. We look forward to more inquiries and cooperation with new customers to become long-term partnership.

Our company, OEM/ODM supplier, produces METALLECA® Automobile Pump Accessories Housing for automobile needs. This kind of housing is asked to show high specifications in appearance, performance, assembly and other aspects. There is a rigorous production process from blank to machining process. In the casting process, we focus on mold design, pouring temperature, pouring speed, aluminum clarity (exhaust gas, slag removal), blank surface treatment. In the manufacturing process, we also consider the rationality and stability of fixture design, the machining precision of critical dimensions, the rationality of turnover (method, protection, etc.), surface treatment method, the standard packaging and pallet methods to the final shipment.

METALLECA® Motor housings are widely used in generators and electric motor series. The power of motor is range from 1KW to 20KW. The materials of the housing are no longer limited to steel and pig iron as in the past, then the thin and lightweight stainless steel and aluminum alloy are also more popular. Our production of motor housing is made aluminum alloy and common carbon steel. The housing of the motor has a protective effect and functions as a component mounting frame. In addition, some special models of motor housings also have functions with heat dissipation or sound insulation.

METALLECA® Bucket Teeth of Excavator is required high performance and assembly. There is a mature standardized production including production, manufacturing and control processes from blank to heat treatment. In the casting process, we focus on mold design, pouring temperature, iron and molten steel clarity (exhaust gas, slag removal), material chemical composition, pouring speed, blank surface treatment and dimensional stability of assembly. In the heat treatment, we also consider mechanical properties of heat treatment, anti-rust treatment (such as painting), and the standard packaging and pallet methods to the final shipment.