tooth timing pully Manufacturers

METALLECA® Harvester Accessories are applied in agricultural machinery. The agricultural machinery is rapid widespread and obviously improvement the efficiency of agricultural production. The rapid development of agricultural mechanization is one of the important characteristics in modern agriculture. Especially, the modern intelligent manufacturing has accelerated agricultural mechanization, modern agriculture, and agricultural production to meet market demand. Therefore, the production of harvester and related machinery parts are gradually increasing in demand.

Forging Process is one of the two components of forging (forging and stamping), in which forging machine is used to press metal billet to produce plastic deformation and Electric Power Fittings so as to obtain forging with certain mechanical properties, shape and size.
According to the way the blank moves, forging can be divided into free forging, upsetting, extrusion, die forging, closed die forging, closed heading forging. 1.Free forging. Use the impact force or pressure to deform the metal between the upper and lower iron (anvil block) to obtain the required forgings, mainly manual forging and mechanical forging two kinds.
2.Die forging. Die forging is divided into open die forging and closed die forging. The metal blank is obtained by compression deformation in the forging die bore of a certain shape, which can be divided into cold heading, roll forging, radial forging and extrusion, etc.
3, closed die forging and closed heading forging because there is no flying edge, the utilization rate of materials is high. It is possible to finish complex forgings with one or several processes. Since there is no flying edge, the forgings have less force area and less load required. However, it should be noted that the blank can not be completely restricted, so it is necessary to strictly control the volume of the blank, control the relative position of the forging die and measure the forging die, and try to reduce the wear of the forging die.

The METALLECA® Hand Held Impact Hammer Aluminum Shell are machines used in the construction and engineering industrial. There are composed of three parts: head, impactor and handle body that main technical feature is hydraulic oil or compressed air as the working medium. The cylinder of hammer bears differential alternating oil pressure, constant pressure or air pressure to cause the hammer periodic reciprocating movement.

METALLECA® Shell of Gas Cutting Machine are mainly used in gas cutting machine and laser beam cutting machine. Cutting machines are widely used in various industries, especially in modern innovation manufacturing that accelerates market demand. For this reason, the demand of cutting machine related parts and components has gradually increase.

The nameplate is an installed mark on machines, instrumentations, motor vehicles, etc. with the name, model, specification, date of manufacture, manufacturer, and so forth. It provides manufacturer's trademark identification, brand differentiation, and product parameter inscription when the product is released on the market and fixed brand information. The nameplate is used to record technical data of the manufacturer and specified working conditions to make sure use appropriately without damaging the equipment.

Our METALLECA® Pipe Valve Joint production can be customized according to requirement of domestic and foreign customers. Production would follow specific requirements (assembly, performance, life, corrosion resistance, etc.) to select the correct processes and materials (mainly used aluminum alloy, stainless steel, carbon steel). Otherwise, the production and processing are based on the customer specification. We specialize in producing unpatented products and do not have our own brand. At present, we supply a few quantities for supporting machinery and equipment to domestic and foreign customers. We look forward to more inquiries and cooperation with new customers to become long-term partnership.