Ventilation Equipment Cover Manufacturers

Forging Process is one of the two components of forging (forging and stamping), in which forging machine is used to press metal billet to produce plastic deformation and Electric Power Fittings so as to obtain forging with certain mechanical properties, shape and size.
According to the way the blank moves, forging can be divided into free forging, upsetting, extrusion, die forging, closed die forging, closed heading forging. 1.Free forging. Use the impact force or pressure to deform the metal between the upper and lower iron (anvil block) to obtain the required forgings, mainly manual forging and mechanical forging two kinds.
2.Die forging. Die forging is divided into open die forging and closed die forging. The metal blank is obtained by compression deformation in the forging die bore of a certain shape, which can be divided into cold heading, roll forging, radial forging and extrusion, etc.
3, closed die forging and closed heading forging because there is no flying edge, the utilization rate of materials is high. It is possible to finish complex forgings with one or several processes. Since there is no flying edge, the forgings have less force area and less load required. However, it should be noted that the blank can not be completely restricted, so it is necessary to strictly control the volume of the blank, control the relative position of the forging die and measure the forging die, and try to reduce the wear of the forging die.

METALLECA® Daily Necessities and Bathroom Accessories are formed by presses and molds to apply external force to plates, strips, pipes and profiles that result in plastic deformation or separation. Then, the stamping pieces acquire the needs of shape and size.
With the rapid development of technology and improvement of equipment requirement, the demand for precision accuracy stamping pieces is increasing and the applications are getting wider.

The METALLECA® Medical Device Accessories need high quality requirements for materials, surfaces and dimensions. Chinese proverb: a workman must first sharpen his tools if he is to do his work well. With the rapid development of medical device technology, the demand for medical device precision stamping parts is increasing. At the same time, the technical requirements are getting higher, and the applications are getting wider. Basically, stamping parts appearance has to zero defects. For this reason, a standardized manufacturing process to ensure quality is necessary. We focus on the selection of raw materials, mold requirements (design, material selection, surface cleanliness, dimensional accuracy, service life), the precision accuracy of stamping equipment, production efficiency, protective turnaround, post processing, surface treatment, packaging methods, etc.

Our METALLECA® Pipe Joints production can be customized according to requirement of domestic and foreign customers. Production would follow specific requirements (assembly, performance, life, corrosion resistance, etc.) to select the correct processes and materials. Otherwise, the production and processing are based on the customer specification. We specialize in producing unpatented products and do not have our own brand. At present, we supply a few quantities for supporting machinery and equipment to domestic and foreign customers. We look forward to more inquiries and cooperation with new customers to become long-term partnership.

The nameplate is an installed mark on machines, instrumentations, motor vehicles, etc. with the name, model, specification, date of manufacture, manufacturer, and so forth. It provides manufacturer's trademark identification, brand differentiation, and product parameter inscription when the product is released on the market and fixed brand information. The nameplate is used to record technical data of the manufacturer and specified working conditions to make sure use appropriately without damaging the equipment.

The METALLECA® Door and window accessories include door control hardware, high-performance household hardware, wooden interior door hardware (plastic, aluminum alloy), window hardware, special types window hardware, sealing strip for building doors and windows, sealing top for building doors and windows, sealant for building doors and windows, ventilator. Since the market demand is increasing, the technical requirements, including intelligence and convenience, are getting higher, and the applications are getting wider. The Door and window accessories need high quality requirements for materials, surfaces and dimensions. Basically, hardware parts appearance has to zero defects. For this reason, a standardized manufacturing process to ensure quality is necessary. We focus on the selection of raw materials, mold requirements (design, material selection, surface cleanliness, dimensional accuracy, service life), the precision accuracy of production equipment, production efficiency, protective turnaround, post processing, surface treatment, packaging methods, etc.